PPS-hGR40 V-0防火性能 PPS得阳
- 发布日期: 2018-01-23
- 更新日期: 2024-04-26
产品详请
特性级别 |
阻燃级|||耐高温|||圄化学性|||高强度|||高刚性|||
|
牌号 |
PPS-hGR40
|
品名 |
PPS
|
厂家(产地) |
四川得阳
|
用途级别 |
电子电器部件|||照明灯具|||家电部件|||电线电缆级|||电动工具配件|||
|
PPS-hGR40 V-0防火性能 PPS得阳
China PPS hGR40
聚苯硫醚
玻璃纤维增强材料
Sichuan Deyang Chemical Co., Ltd
产品说明:
PPS-hGR40 (natural color) and PPS-hGR41 (black) is glass reinforced PPS compound, which is filled with glass fiber based on the PPS resin. The characteristic of PPS compounds includes good mechanical properties, high creep resistance, high temperature resistance, friction resistance, flame resistance, chemical resistance, excellent electrical insulation properties, arc resistance, low mold shrinkage, easy processing good dimensional stability, and radiation resistance.
Owing to its high performance, PPS-hGR40 is widely used in space aviation, chemical, electronic/electric, mechanical industry, automobile, railway fields etc. It can be used to make elements where high temperature resistance, electrical insulation are all important in aviation; anticorrosion valves and electrical insulating parts; precise plugs, outer shells and high temperature resistant contactors; electric parts, terminal and switch; carburetor, distributor, igniter, slide block, gears, thermocouple, piston rings with requirement of high temperature resistance and precision dimension; hot-air tube, crisping iron, hair curler, coffeepot.
China PPS hGR40 物性表
基本信息 |
|
---|
填料/增强材料 | |
特性 | 尺寸稳定性良好 低摩擦系数 高强度 绝缘 抗电弧 抗伽马辐射 可加工性,良好 良好的抗蠕变性 耐化学性良好 耐热性,高 收缩性低 阻燃性
|
用途 | 电气/电子应用领域 电气元件 电器用具 阀门/阀门部件 航空航天应用 汽车领域的应用 墙座
|
加工方法 | |
物理性能 | 额定值 | 单位制 | 测试方法 |
---|
密度 | 1.70 | g/cm3 | 内部方法 |
收缩率 |
|
| 内部方法 |
流动 | 0.25 | % | 内部方法 |
横向流动 | 0.75 | % | 内部方法 |
硬度 | 额定值 | 单位制 | 测试方法 |
---|
洛氏硬度 1 | 111 |
| 内部方法 |
机械性能 | 额定值 | 单位制 | 测试方法 |
---|
抗张强度 | 180 | MPa | 内部方法 |
伸长率 (断裂) | 1.8 | % | 内部方法 |
弯曲模量 | 13600 | MPa | 内部方法 |
弯曲强度 | 272 | MPa | 内部方法 |
压缩强度 | 130 | MPa | 内部方法 |
冲击性能 | 额定值 | 单位制 | 测试方法 |
---|
悬壁梁缺口冲击强度 | 14 | kJ/m2 | 内部方法 |
热性能 | 额定值 | 单位制 | 测试方法 |
---|
载荷下热变形温度 (1.8 MPa, 未退火) | 265 | °C | 内部方法 |
熔融温度 | 282 | °C | 内部方法 |
电气性能 | 额定值 | 单位制 | 测试方法 |
---|
表面电阻率 | 5.0E+14 | ohms | 内部方法 |
体积电阻率 | 5.0E+16 | ohms·cm | 内部方法 |
介电强度 | 17 | kV/mm | 内部方法 |
介电常数 (1 MHz) | 4.00 |
| 内部方法 |
可燃性 | 额定值 | 单位制 | 测试方法 |
---|
UL 阻燃等级 | V-0 |
| 内部方法 |
注射 | 额定值 | 单位制 |
|
---|
干燥温度 | 110 到 140 | °C |
|
干燥时间 | 3.0 到 5.0 | hr |
|
料筒后部温度 | 270 到 290 | °C |
|
料筒中部温度 | 300 到 320 | °C |
|
料筒前部温度 | 300 到 320 | °C |
|
射嘴温度 | 290 到 320 | °C |
|
加工(熔体)温度 | 160 到 180 | °C |
|
模具温度 | 100 到 150 | °C |
|
注塑压力 | 50.0 到 100 | MPa |
|
背压 | 0.100 到 1.00 | MPa |
|
螺杆转速 | 40 到 100 | rpm |
|